Roll out cantilever racks and roll out sheet racks are built for heavy material that is awkward to reach on fixed racking. Every storage level sits on rollers and pulls out of the frame, so the load is fully open from above. An overhead crane, vacuum lifter or forklift can then place or pick a full bundle without lifting the stock stored above it or sliding it across other material.
Roll out sheet racks use flat, drawer-type levels for sheets, plates and boards. Roll out cantilever racks use open arm frames for bars, pipes, tubes and profiles. Both are designed and manufactured in-house around your material sizes, weights and handling equipment.
For fixed arm storage, see our standard cantilever racking and multi tier cantilever racking. For flat stock on fixed levels, compare sheet pallet racks.
Each storage level runs on heavy-duty rollers and pulls out of the frame, exposing the full load for access from above.
Sheets, plates, bars and pipes are lifted straight up and out with an overhead crane or vacuum lifter, without dragging them over other stock.
Levels stay closed during storage and are designed to be locked while extended, so only one level is open at a time.
Material is stacked level above level in one compact frame instead of spread across the floor in separate piles.
Each sheet or bar bundle sits on its own level, so there is no restacking to reach the item underneath and fewer scratched or bent pieces.
Number of levels, level size, load per level and frame height are set to your material sizes and handling equipment.
If your material is heavy, handled by crane and stored in several sizes or grades, roll out storage keeps every size reachable.
Cold-rolled, hot-rolled and galvanised sheets stored flat on individual levels.
Finished sheets kept separate to protect the surface from scratches.
Heavy plates and cut blanks for fabrication, laser and press shops.
Plywood, MDF, ACP and composite panels stored flat and supported.
Round stock on roll out cantilever arm frames, lifted out by crane.
Bright bars, rods and flats held level by level for easy picking.
Aluminium extrusions, channels and sections kept straight and separated.
Raw material stores beside cutting, bending and machining areas.
Designed, fabricated and finished at our own facility in Vasai, sized to your material rather than a standard catalogue.
Quality and environmental management systems certified, with documented process control.
Layout and load requirements are worked out with you before fabrication starts, not after.
Installed and commissioned by our own team, with after-sales inspection and service support.
Tell us your sheet or bar sizes, weights, how many sizes or grades you store and how you load them. Our team will come back with a suitable roll out configuration and quotation.
Trusted By Leading Brands Across India
Warehousing and storage systems trusted by India's leading enterprises
Everything you need to know before you request a quote
